Showing posts with label AutoCAD. Show all posts
Showing posts with label AutoCAD. Show all posts

Tuesday, June 10, 2014

AutoCAD 수업노트

강의 개인 준비물
  •   AutoCAD가 설치된 컴퓨터
  •   PDF를 작성할 수 있는 소프트 웨어
  •   연필, 삼각자, 축척자, A4, A3, 지우개

그림으로 사물 표현하기
  눈에 맞추어 그리기(투시)/사물에 맞추어 그리기(투상)
  투상/투시도의 종류
출처: 사이버 제도교실

  Gaspard Monge의 이론
  1각 투상도/3각 투상도
출처: 사이버 제도교실

Saturday, April 12, 2014

Can't copy/paste nor insert a block in AutoCAD?

Sometimes I get to face a weird situation when I deal with AutoCAD.


I can't copy and paste any components from a specific file to another file. If I can copy and paste within the file, no brainer but doing outside the file, it will be different story. This is the typical symptom.
  • can't copy and paste outside the file
  • can't insert the file into another file as a block. It gives 'invalid' comment
  • sometimes you get 'Duplicate definition of block GENAXEH ignored'
  • doesn't work even after executing 'purge'
  • still doesn't work despite taking out with 'wblock'
After several hours struggle, finally done. I guess the problem involves with file format or version issue. This is what I tried and made it work.
  • save the troubled file as 'dxf' format
  • insert the 'dxf' file as a block
  • Done!

가끔 AutoCAD를 사용하다보면 블락을 불러올때 'invalid'오류가 뜨는 경우가 있다.

문제의 화일 안에서 복사하고 붙여넣는 것은 문제 없지만 다른 화일로 복사 붙여넣기가 되지 않는다. 현상은 다음과 같다.
  • 해당 화일 밖으로 복사/붙여넣기 불가
  • 다른 화일에서 블락으로 가져오기 불가. 'invalid' 메세지가 뜬다
  • 가끔 'Duplicate definition of block GENAXEH ignored' 메세지가 뜨기도 함
  • 'purge'후에도 소용없음
  • 'wblock'으로 일부분을 화일 밖으로 저장해 나가도 소용없음
아래와 같은 방법으로 해결할 수 있다.
  • 해당 화일을 'dxf' 형식으로 저장
  • 블락으로 'insert'할 경우 그 'dxf'화일을 가져온다.
  • 성공!

Monday, November 19, 2012

Solidworks to SketchUp

From recent updates on new version of AutoCAD, no more need of conversion to DWG from Solidworks. Now AutoCAD 201 has ability to import Solidworks parts and assembly directly.

New procedure

1. Execute 'import' command in AutoCAD (in my case, AutoCAD 2013).
2. Import Solidworks file you want to convert.

3. Save it to DWG.
4. Open it from SketchUp.
5. Done!


------------ Old post -------------------------------------------------------

Hooray!!!

Finally I found out the solution exporting a component of Solidworks to SketchUp. This has been mostly wanted feature I have been longing.

This is the simple steps.

1. Save as ASCI(*.sat) from Solidworks.
2. Open the file from DWGeditor which is a part of package of the Solidworks.
3. Save as *.dwg from DWGeditor.
4. Import the DWG file to SketchUp.
5. Apply 'Soften/Smooth edges' to the imported.

This drum.....


can be exported to SketchUp like this...

and... smooth-edged......

Looks charm as it should be.


Thanks to 'watkins' for the related post and also to lots of the devoted people in Sketchucation!!






Saturday, October 1, 2011

Scale issue in DWG exported from SketchUp 8

I use SketchUp for modelling and AutoCAD for documentation.

This is the procedure.
1. Creating a model in SketchUp with metric unit
2. Set up a scene with parallel view
3. Export as DWG with the full scale option checked.
4. Insert the file as block or X-ref in AutoCAD with same unit.

This way enable me to update the inserted block whenever I change the original model, export again, and replace the old one.

But recently there is an issue. If I insert the exported file into AutoCAD, the file appear scaled by 25.4 (I use metric unit). This wasn't any problem before and I have been the same in the steps of my workflow. I guess there is some change in the DWG exporter in SketchUp 8 or something in AutoCAD.

New simpler way to adjust insertion scale in AutoCAD. But care must be taken before you use this method. This method only can be used when you know the converted file made in metric but AutoCAD recognize it as in imperial unit.

So this is how you do.
When you insert a DWG exported from SketchUp into AutoCAD. The first thing you want to check is 'insertion scale'. In order to check, go to top left of the AutoCAD window and 'Drawing Utilities' and click 'Units'

Then check the 'insertion scale' option in the new window. Change the option under 'Insertion Scale' so you can match the scale of the file generated from SketchUp.

Once the setting done, insert a drawing that created from SketchUp.
Type 'insert' to insert the file as block.
Top of the window you can browse the DWG file you want to insert. Once you choose the file, make sure you have 1 in the block unit factor field. If you don't have the factor different, go to 'Drawing Unit' to change the setting in Insertion Scale field so you can match the proper scale.




------------------- Obsolete post ------------------------------------------------

The reason of this happening seems that SketchUp exporter is working in imperial unit regardless of your setting and AutoCAD is working in unitless. No matter which unit setting you have in SU, after exporting the file to AutoCAD, you get to see imperial setting in inserting unit in the file.


So, when you insert the file as a block, you can see 'block unit' is set in inches.


Earlier version seem to export their model respective to the model unit but this version seem to neglect it.

The solution that I have to take is changing scale setting in exporting dialogue box. Instead of having the 'full scale' option checked, type in scale factor to adjust the issue (1mm in drawing, 25.4mm in model).